Silkscreened Glass

Silk Screen Glass


  • Glass on which is applied, using a silkscreen, a ceramic frit coating to reproduce the pattern of your choice.
  • When printing, the ceramic crosses only the open mesh of the screen which, as a stencil, reproduces the printed pattern.
  • The ceramic is then fire-fused to the glass surface by heat treatment.


The multiple possibilities of colors and patterns allow to print:

  • Geometric patterns
  • Lettering
  • Logos
  • Etc…
Verre sérigraphié

Glass makeup

Monolithic Glass

The ceramic coating is applied on face #2 on the glass*. The glass must be heat strengthened or tempered.  It is not recommended to expose the ceramic coating to the elements. Use on face #1 should be avoided.

Laminated Glass

The ceramic coating can be applied on face # 2, # 3 or # 4, of laminated glass*.  For exterior use, all the glass plies should be heat strengthened or fully tempered.

Insulating Glass

The ceramic coating is applied on face #2 or #3 of insulated glass units.* The two lites that make up the unit should be heat strengthened or fully tempered.

*Certain conditions apply. Contact us for additional details.


Clear , low-iron, tinted


Standard Opaque

White PC- 9912, Opacity White PC-8695, Feather Grey PC-8800, Warm Grey PC-8933V, Medium Grey PC-8948, Charcoal PC- 9903, Wolf Grey PC-8194, Solar Grey PC- 9901, Black PC-9907, Spruce Shadow PC-8282, Evergreen PC- 9902, Lava Bronze PC-9905,  Solar Bronze PC-9904, Blue Ford PC-9911

Standard Translucent

Light Blue PC-7001, Light Green PC-7002, Charcoal PC- 7003, Yellow PC-7004, Clear PC- 7005, Azur PC- 7006, Cherry PC- 7007, Simulated Sandblast PC- 7008, Simulated Acid Etch PC- 7009



  • Provides greater creative flexibility to the designer for any type of interior or exterior design
  • Allows solar gain control and protection against glare
  • Protects the privacy of the occupants
  • Reduced light pollution
  • Allows permanent printing of logos, text or any other geometric shapes on the glass

Production Capacity

Manufacturing Specifications
Silkscreen  Minimum Dimensions Maximum Dimensions 
 mm  po  mm  po
Without seam  200 x 400  7 7/8 x 15 3/4  1524 x 4140  60 x 163
With seam*  200 x 400 7 7/8 x 15 3/4  2438 x 4978 96 x 196 

*Although all measurements are taken to minimize the appearance of a seam, it is sometimes noticeable once the glass has been screen-printed. The appearance of a seam depends on the complexity and density of the pattern. In some cases it may be preferable to reduce the size of the glass lites.  Contact us for additional information.


Clic on thumbnail to enlarge image.


Jean-Lessage International Airport (Extension)GLCRM & Associés Architectes / Laminated, Silkscreened and Structural Point Supported Glass / Québec, QC

  • alt

ITHQAEdifica et Lapointe Magne & associés architectes / Silkscreened Glass / Montreal, Qc

  • alt

Espace 400eDan Hanganu architectes et Côté Leahy Cardas architectes / Silkscreened Glass / Québec, Qc

  • alt
Green Buildings
Thermaspec : Performance Calculating Tool
Technical Assistance